Assembler-Intermediate Mechanical (Dept 751- 2nd Shift)

In this job you will assemble Mark V, TR-II, ScadaMate, or Vista Switches. You will work in a production environment, engage in continuous production activity, must meet requirements within time constraints and you will be held accountable for the quality of your work. Tasks require a mechanical assembly aptitude, an above average degree of eye-hand coordination, manual dexterity, and the use of both hands and arms on a repetitive basis for a full range of motion. You will frequently use hand and power tools; working while standing on the floor and occasionally on a ladder or manlift.

The responsibilities of this position include, but are not limited to, the following:

• Assembling Mark V circuit-switchers at one of several stations, ranging in size from 6’ x 10’ x 10’ to 15’ x 15’ x 15’.

• Assembling TR-II switches, ranging in size up to 5’ x 1’ x 1’ to 11’x 1’ x 1’.

• Identifying, transporting, installing, mounting and bolting all switch components (ranging from 5 lbs. to over 100 lbs. with assistance). Some judgment required to assemble and make simple adjustments.

• Performing mechanical inspection using torque wrenches, screwdriver and tape measure, and electrical inspection using a test console.

• Using simple material handling equipment, hand tools, power tools, simple gauges and instruments, and overhead cranes.
  

To select this job as one of interest to you, at a minimum, you must have the following:

• Demonstrate knowledge of mechanical assembly operations

• Demonstrate the skills to use air impact tools and other hand-held tools.

• Ability to use shop math and measuring tools such as tape measures.

• Ability to follow specific instructions and procedures and read assembly prints.

• Ability to read a wiring diagram
  

Relevant Work Experience:

Must have at 3 years of mechanical assembly experience or similar training.

MAJOR PHYSICAL DEMANDS

Standing: Most tasks are performed in a standing position with frequent walking.

Lifting: Frequent lifting of items ranging in weight from 5 lbs. to 50 lbs.

Walking: Frequent walking of short distances (approx. 200 feet or less).

Carrying: Frequent carrying of items ranging in weight from 5 lbs. to 50 lbs.

Pushing: Occasional use of manual or electric hand trucks to move parts a moderate distance.

Pulling: Occasional use of manual or electric hand trucks to move parts a moderate distance.

Bending: Frequent bending and crouching required to complete assembly tasks.

Reaching: Continuous full range of motion from above the shoulders to below the knees.

Handling: Continuous handling of parts ranging in weight from 5 lbs. to 100 lbs. along with a variety of hand tools.